Sorry, Can not found Your Story Products List

|| |||| || ||
Products Catalogue
>> New Arrival
Polymer Polyol for hard sponge
Polymer Polyol for hard sponge
Polymer Polyol for hard sponge  POP-2015
MOQ: 16800Kgs
SOLD: 0Kgs

Polymer Polyol for hard sponge

EXW USD$2,336.36
MOQ:16800 PCS
Solid content 15% Polymer Polyol for Flexible Foam
❤ POP-2015 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solidcontent of approx 15% by weight. It can be used for the production of slabstock foams.
❤ Handling PrecautionsFlash point is above 200℃ (open cup method), flammable but non-explosive. In case of fire, put out withfoams, dry powder, steam or water.When handling polyols, avoid exposure to eyes or prolong contact with the skin. If eye contact occurs,flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.
❤ StorageRecommended storage temperature (℃):10-35Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.Partially used containers should be tightly resealed due to the hygroscopic nature of the product.Recommended temperature for processing (℃):20-25.
Contact Supplier
上海卡通派数码科技发展有限公司© 版权所有 Copyright © 2013 Shanghai Cartoon.All Rights Reserved. Tel:+86-21-61526108 / Fax:+86-21-61526157